UNI Web Header 2016 12 09

9-5/8" Casing Tong (STD)

CASING TONG 9.63 Tong FINAL Small Feb 4 2015
 
CASING TONG 9.63 Tong with Backup FINAL Small Feb 4 2015
 pdf button 15 Modelpdf button 24 Model

Specifications

15 Model

24 Model
Torque at 2,000 psi (13,790 kPa)
Low Gear 14,400 ft-lbs
(1,991 kg-m)		 22,000 ft-lbs [Max]
(3,042 kg-m)
High Gear 3,715 ft-lbs
(514 kg-m)		 5,675 ft-lbs
(785 kg-m)
Torque at 2,500 psi (17,237 kPa)
Low Gear 18,000 ft-lbs
(2,489 kg-m)		  
High Gear 4,650 ft-lbs
(643 kg-m)		  
Torque at 3,000 psi (20,684 kPa)
Low Gear 22,000 ft-lbs [Max]
(3,042 kg-m)		  
High Gear 5,675 ft-lbs
(785 kg-m)		  
Speed at 45 GPM (170 LPM)
Low Gear 15 RPM 9 RPM
High Gear 57 RPM 36 RPM
Speed at 65 GPM (246 LPM)
Low Gear 21 RPM 13 RPM
High Gear 83 RPM 52 RPM
Torque and Speed Charts
Jaws Available
Insert Dies 2-3/8 in to 9-5/8 in
(60.3 mm to 244.5 mm)		 2-3/8 in to 9-5/8 in
(60.3 mm to 244.5 mm)

Tong Dimensions
Length 49-1/4 in
(1.25 m)		 49-1/4 in
(1.25 m)
Overall Width 28-1/2 in
(0.72 m)		 28-1/2 in
(0.72 m)
Torque Arm 30 in
(0.76 m)		 30 in
(0.76 m)
Weight 1,100 lbs
(498 kg)		 1,100 lbs
(498 kg)

Tong Dimensions With Hydraulic Backup
Length 49-1/4 in
(1.25 m)		 49-1/4 in
(1.25 m)
Overall Width 32-3/8 in
(0.82 m)		 32-3/8 in
(0.82 m)
Torque Arm 24 in
(0.61 m)		 24 in
(0.61 m)
Weight 2,100 lbs
(952 kg)		 2,100 lbs
(952 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in
(282.6 mm to 616.0 mm)		 11-1/8 in to 24-1/4 in
(282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.