UNI Web Header 2016 12 09

5-1/2" Tubing Tong

TUBING TONG 5.5 Tong FINAL Small Feb 2 2015
 
TUBING TONG 5.5 Tong with Backup FINAL Small Jan 29 2015

Specifications

Torque at 2,500 psi (17,237 kPa)
Low Gear15,000 ft-lbs [Max]
(2,074 kg-m)
High Gear3,900 ft-lbs
(539 kg-m)
Speed at 45 GPM (170 LPM)
Low Gear18 RPM
High Gear71 RPM
Speed at 65 GPM (246 LPM)
Low Gear26 RPM
High Gear102 RPM
Torque and Speed Charts
pdf button Torque & Speed Chart
Jaws Available
Wrap-Around Dies4-1/4 in to 5-1/2 in
(108 mm to 139.7 mm)
2-1/6 in to 4-1/8 in
(52.4 mm to 104.8 mm)

Tong Dimensions
Length 45 in
(1.14 m)
Overall Width 24-1/2 in
(0.62 m)
Torque Arm 26 in
(0.66 m)
Weight 850 lbs
(385 kg)

Tong Dimensions With Hydraulic Backup
Length 45 in
(1.14 m)
Overall Width 26-1/4 in
(0.67 m)
Torque Arm 24 in
(0.61 m)
Weight 1,635 lbs
(742 kg)
Clearance
(Between Jaws)		 5-5/8 in to 18-3/4 in
(142.9 mm to 476.3 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.